![Two derailed locomotives and derailed hopper cars](https://www.trains.com/wp-content/uploads/2021/07/TRN_Goderich_derailment_TSB.jpg)
RICHMOND HILL, Ontario — An inadvertent brake release by the engineer as he left the locomotive cab led to the derailment of a runaway train earlier this year on the Goderich Exeter Railway in Goderich, Ontario, the Transportation Safety Board of Canada has determined.
In the Feb. 1, 2021, accident, two locomotives and six cars of a train ran away down a steep grade to a grain elevator at the Port of Goderich, striking two vehicles and destroying a structure before coming to a halt. No one was injured, even though one of the vehicles was occupied. [see “Digest: Canadian short line train derails …,” Trains News Wire, Feb. 2, 2021, and “News photos: Goderich runaway cleanup continues,” News Wire, Feb. 5, 2021].
In a report issued Thursday, the TSB says the engineer bumped the automatic brake handle as he detrained to throw the switch for a derail, moving the brake handle from fully applied to release. While he was on the ground lining the split switch for the derail, the train began to move, and the engineer was unsuccessful in reboarding the train.
The train crew was able to radio ahead to track maintenance personnel who were working at the Port of Goderich; those workers were able to line switches to route the train to a clear track that ended within the facility.
Rolling downhill on a grade ranging from 1.5% to 2.78%, the train reached a speed of 27 mph during about 8,500 feet of uncontrolled movement over a period of 2½ minute before derailing at the end of the track in the port facility; the train ultimately came to a halt about 345 feet past the end of track and just short of Goderich Harbor. The train struck an unoccupied truck loaded with grain, destroying the tractor and trailer; struck a pickup truck with two occupants who were trapped when the truck was pushed against a fence; and destroyed a wooden shed.
As a result of the accident, the railway issued a rule prohibiting engineers operating in Goderich Yard from exiting the cab for anything other than engineer-related functions. Transport Canada issued two ministerial orders, one requiring safety measures to ensure no further accidents are caused by accidental brake release, and one addressing parameters design and performance parameters for locomotive roll-away protection, as well as requirements for its use.
![Maps showing location of Goderich, Ontario, and path of runaway train](https://www.trains.com/wp-content/uploads/2021/07/TRN_Goderich_Map_TSB.jpg)
Is there not a spring loaded safety device to prevent inadvertent changes?
Guessing the old type control stand is installed in the locomotive. How does the engineer “bump” the automatic brake handle hard enough to release the brakes and not to notice it and not realize the brakes are being released
I have trouble believing that this was an accident or a bump, either one. To release the automatic brake from Full Application to Release requires moving it almost 90 degrees. Accidental? Really?
Yes Paul I agree with you. But you know that there stock holders need there dividends. So where ever we can save a dollar we will. No matter dangerous things get. Good thing the MOW crew was there to switch it to an empty track.
Goderich and Exeter is part of the G&W family, a privately owned regional and short line conglomerate not answerable to Wall Street. So your statement in regards to this incident is irrelevant.
This is why you need 2-3 man crews if the engineer didn,t have to get off the train to throw a switch this would never would have HAPPENED PERIOD !!!!
Based on the fact the railroad was able to make a rule stating the Engineer is no longer to leave the locomotive except for Engineer related duties tells me there was already a second person on the crew, just not nearby enough to throw the DERAIL switch.