Introducing the all-new Trains.com Forum! Become a part of our Community! >>VISIT NOW
Download the PDF of this project here. Note: This PDF is formatted to print on your home printer. Most pieces are formatted to fit on a 8.5″ x 11″ piece of paper. For larger parts of the plan, you will see “break lines.” Line up the break lines to create the larger piece. Despite our […]
Download the PDF of this project here. Please note: Despite our best efforts to compress this file, it is graphically intense and may take a few minutes to download. NOTE: Please make sure that “none” is selected for “page scaling” and “auto-rotate and center” boxes are NOT checked when you print this file. […]
Download the PDF of this project here. Download a PDF to build a 1:20.3 scale hot-dog stand. Note: This PDF is formatted to print on your home printer. Most pieces are formatted to fit on a 8.5″ x 11″ piece of paper. For larger parts of the plan, you will see “break lines.” Line up […]
Download the PDF of this project here. This PDF is formatted to print on your home printer. Most pieces are formatted to fit on a 8.5″ x 11″ piece of paper. For larger parts of the plan, you will see “break lines.” Line up the break lines to create the larger piece. Despite our best […]
Track plan at a glance Name: Stove Pipe WellsScale: N (1:160) narrow gauge (Nn3)Size: 4′-1″ x 9′-0″Theme: mining short lineEra: 1870s to 1950s, depending upon rolling stock usedStyle: portableMainline run: 34′-6″Minimum radius: 10″Minimum turnout: no. 5Maximum grade: 5 percentOriginally appeared in the December 2006 issue of Model Railroader.Also appeared in 102 Realistic Track Plans.Click on […]
Align every rail joint Every rail joint must be carefully aligned, properly fitted, and level. Sight along the rail to check the alignment through the rail joiner. After the track is spiked down, use a fine file to smooth the top and inside corner of the rail joint until you can slide a fingernail across […]
