Enter your email below to instantly receive this free 15-page guide with tips on: Building simple deck plate girder bridges Creating a bigger scene with mirrors Adding animation to your layout […]
Illustrated layout projects
Modeling Topic: Structures
Photo of the Day
Train time at Chadron, Nebr. Way out on Chicago & North Western’s lonely “Cowboy Line,” 4-6-2 No. 1588 arrives Chadron, Nebr., with daily-except-Sunday train 13 from Omaha, 447 miles to the east. The train is bound for Rapid City, S.Dak., 104 miles west. Fred H. Ragsdale photo […]
Tried and True Tools from the Kalmbach Hobby Store
Want to learn what the editors of Model Railroader and Model Railroader Video Plus use when they head down to the workshop to build the latest model or layout? Check out these Tried and True Tools and other products available at the Kalmbach Hobby Store! […]
Tried and True Tools from the Kalmbach Hobby Store
Want to learn what the editors of Model Railroader and Model Railroader Video Plus use when they head down to the workshop to build the latest model or layout? Check out these Tried and True Tools and other products available at the Kalmbach Hobby Store! […]
Produce packing
Several packing houses were located in close proximity to each other along the Santa Fe in Placentia, Calif. Styles varied from the frame building at left to the concrete structure at center. Note the semaphore signal installations at right. Photo by Tom Baxter […]
Cripple Creek Engine Works structure from Menards
THE CRIPPLE CREEK ENGINE WORKS Price: $89.99 Stock no.: 279-5926 Features: Assembled and decorated locomotive shop. One run-through stall and one dead-end stall. Exterior LED illumination. Illumination requires the Menards Plug & Play 4.5V power supply nos. 279-4061, 4062, or 4050, sold separately. Order online at Menards.com/Trains. Locomotives – steam or diesel – require regular […]
How-to Library: Building a turntable, Part 6 – A-frames, gallows, and truss rods
David’s pile of parts is much smaller, as he works to complete the O scale laser-cut wood turntable kit. In this episode, he’ll share his insights for working with basswood stock and bending metal rods. Next and final steps? Adding the finishing details! […]
How-to Library: Building a turntable, Part 5 – Wheels and track installation
The bridge assembly is well underway, so David can now focus on building and installing the wheels that put his O scale laser-cut wood turntable kit into motion. If that’s not enough, he even gets the rails placed on bridge deck and takes a locomotive for a spin! […]
How-to Library: Building a turntable, Part 5 – Wheels and track installation
The bridge assembly is well underway, so David can now focus on building and installing the wheels that put his O scale laser-cut wood turntable kit into motion. If that’s not enough, he even gets the rails placed on bridge deck and takes a locomotive for a spin! […]
How-to Library: Building a turntable, Part 4 – Bridge parts assembly
After installing the motor mechanism, David adds an automated polarity control to his O scale laser-cut wood turntable kit. And then, it’s on to separating, sorting, and building the bridge assembly. […]
How-to Library: Building a turntable, Part 4 – Bridge parts assembly
After installing the motor mechanism, David adds an automated polarity control to his O scale laser-cut wood turntable kit. And then, it’s on to separating, sorting, and building the bridge assembly. […]
How-to Library: Building a turntable, Part 3 – Installing the motor mechanism
David has now arrived at the stage where it’s time to install the drive mechanism into his assembled O scale laser-cut wood turntable kit. Follow along as he shares his process for fitting the 3-volt can motor and reduction gear used to put the structure into motion. […]
