My little shelf layout is made from track and lumber salvaged from a small model railroad I was building in my apartment living room back in Pennsylvania before I moved to Wisconsin to work for Model Railroader. In my current living room, I only have room for a shelf layout, which is built into an […]
Read More…
HO Scale Walthers turnouts introduction Like their predecessors, the latest generation of turnouts is DCC friendly. Turnouts that are DCC friendly minimize the possibility of a short shutting down part of a model railroad due to metal wheels contacting adjacent rails that are at a different polarity. The new Walthers Track line turnouts are available […]
Read More…
In the April 2021 issue of Model Railroader, I wrote about DCC reversing sections. I briefly touched on some automatic reversing section controllers (ARSC) that are available. This month I will focus on ARSCs that do more than just the basic reversing functions. Have no fear, because all ARSCs still work with as few as […]
Read More…
By Allan Gartner The Advanced Control Module from Walthers will work with DCC systems capable of controlling accessories, such as turnouts. Your system will need at least one throttle that you can set thrown/closed, on/off, 1/2, or whatever your system calls it, as needed. Systems where the throttle only allows you to toggle from the […]
Read More…
Everything runs on Bluetooth these days, so why not your locomotives? BlueRailDCC from Tam Valley has a solution (BlueRailDCC). This compact board (.57” x 1.5”) supports up to 2A of current, plenty for most HO scale installations. To connect, you’ll need to download the BlueRail Trains app to your Apple iPhone or iPad. Android support […]
Read More…
Some of today’s short-wheelbase locomotives have issues with the prototypical switches and narrow-angle crossings that make an O gauge railroad look realistic. Here’s a quick fix that will allow any locomotive - even this economical Bethlehem Steel saddle tanker from Lionel – to perform reliably over the troublesome trackwork. THIS IS A PHOTO FEATURE. CLICK […]
Read More…
Picking the right power supply for your railroad has one toe in the present and one in the future. It will need to run what you have today and will be expected to perform just as well years from now. Transformers aren’t cheap, but today’s O and S gauge hobbyists have a better selection of […]
Read More…
MRVP’s Ben Lake explains the essential components and process for establishing a digital means to control trains, turnouts, blocks, and even signals. His solution? JMRI interfaced with a Raspberry Pi computer. Follow along, and get up to speed on this cutting-edge DCC option for operating your model railroad! […]
Read More…
See how David Popp installed a Bachmann Trains DCC sound decoder and TCS capacitor into an O scale (1:48) 14-ton Heisler steam locomotive used on the Olympia Logging Co., a popular MRVP project railroad. […]
Read More…
In part 3 of this MRVP mini-series, Gerry Leone resumes his helpful instructions for working with an Arduino. This time Gerry shows how he harnessed their usefulness to solve a problem on his HO scale layout. Turns out the tiny devices really are powerful enough to stop a train in its tracks…or from flying off […]
Read More…
Garden railroad electrical/electricity questions and answers Is it safe to power your trains outdoors? Will I get electrocuted? It’s completely safe to run track power outdoors! Our trains, like those in the smaller scales, run on low-voltage DC, usually 18-24V. Thus, it is perfectly safe to run your trains outdoors, even in the rain or […]
Read More…