Having trouble viewing this video? Please visit our Video FAQ page Welcome back to Cody’s Workshop. In episode 3, Cody shows you how to get a realistic weathered finish for your flatcar decks. He also gives you some tips on using punches to make drillbit starter holes, and answers a variety of viewer mail. […]
Section: Modeling
Thin Branch Series: Benchwork part 4 – Fascia
Having trouble viewing this video? Please visit our Video FAQ page In the fourth and final benchwork video for our Thin Branch Project Railroad, David adds the fascia to the HO layout using tempered hardboard. This technique can be used on any model railroad. […]
Thin Branch Series: Benchwork part 4 – Fascia
Having trouble viewing this video? Please visit our Video FAQ page In the fourth and final benchwork video for our Thin Branch Project Railroad, David adds the fascia to the HO layout using tempered hardboard. This technique can be used on any model railroad. […]
Thin Branch Series: Benchwork part 3 – plywood subroadbed
Having trouble viewing this video? Please visit our Video FAQ page In this video episode of our Thin Branch HO scale project railroad, the layout gets its plywood subroadbed installed. David shows you how to mark and cut the plywood for smooth transitions between the levels and support it with simple risers made from […]
Thin Branch Series: Benchwork part 3 – plywood subroadbed
Having trouble viewing this video? Please visit our Video FAQ page In this video episode of our Thin Branch HO scale project railroad, the layout gets its plywood subroadbed installed. David shows you how to mark and cut the plywood for smooth transitions between the levels and support it with simple risers made […]
Build a small firehouse in 1:29 scale
This 150-year-old fire house is still standing today in Galena, Illinois. It was the home of the Galena Volunteer Fire Co., which was organized on February 1, 1830. Today it is not in use as a fire house but has been converted to a museum. Download the PDF of this project here. This PDF is […]
Build a liquid-asphalt transfer terminal
Pelle Søeborg shows how he scratchbuilt a liquid-asphalt transfer terminal in the June 2013 Model Railroader. Back in the February 1994, Clyde Maybee Jr. showed how he modeled the industry on his layout. Click on the link to download a PDF of the original article. […]
Waterbury, Vermont historic railroad station drawings
Waterbury, Vermont’s historic railroad station was built by the Central Vermont Ry. in 1875. The station was the centerpiece of Waterbury Village for more than 75 years, serving as the gateway to nearby attractions. Its main entrance faced the village green. Through the 1950s, it was the destination for the Central Vermont’s Ski Train, which […]
Port Trenton, Baltimore & Ohio Paquettin Division
Name: Port Trenton, Baltimore & Ohio Paquettin Division (2013, original version) Layout designer: Mike Tricker Scale: HO (1:87.1) Size: 16′-6″ x 16′-6″ Prototype: Baltimore & Ohio Locale: Appalachian Mountains and New Jersey waterfront Style: partial mushroom Era: early to mid-1950s Mainline run: 78 feet (branchline run: 33 feet) Minimum radius: 30″ (main line), 15″ (waterfront […]
VIDEO: Accucraft’s live steam Emma locomotive
Don’t miss the full review of Emma in the June 2013 issue! […]
Thin Branch Series: Working with plaster rocks part 2
Having trouble viewing this video? Please visit our Video FAQ page Once you’ve cast rocks in plaster, it’s time to install them on the layout. In this video, David shows you how he cut, fit, and cemented plaster rock castings to the Thin Branch project railroad. […]
Thin Branch Series: Working with plaster rocks part 1
Having trouble viewing this video? Please visit our Video FAQ page Whether it’s a mountain face or just a simple outcropping, sooner or later you’ll probably need to model rocks on your layout. In this video, David shows you how he cast rocks from plaster for the Thin Branch project railroad. […]