Introducing the all-new Trains.com Forum! Become a part of our Community! >>VISIT NOW
The town of Williams Bay takes shape on the HO scale Bay Junction project. Model Railroader associate editor Steve Otte shows some of the scratchbuilt interior buildings that he made for a block of structures from a Walthers Merchant’s Row kit. On the opposite end of the layout, executive editor Andy Sperandeo installed a kitbashed […]
Lots of work is taking place on the Model Railroader staff’s Bay Junction model train layout. Associate editor Cody Grivno has installed his United Cooperative grain elevator, while senior editor Dana Kawala describes building the fertilizer plant that will be located in front of the scene. Managing editor David Popp will also show how the […]
Editor Neil Besougloff declares one end of the Model Railroader staff’s Bay Junction project model train layout complete. On the other end of the layout, Neil and managing editor David Popp continue to rejuvenate scenery with additional ground cover. David has also installed and painted rock castings for the riverbed. […]
The wiring is just about finished on the Bay Junction project layout. Managing editor David Popp shows you how to power turnout frogs. On this model railroad we’re using Peco track and turnouts and running trains with Digital Command Control (DCC). David has also installed a Tam Valley Depot Hex Frog Juicer and will describe […]
Model Railroader senior editor Jim Hediger finished Kelly Appliance Co. and installed the structure on the Bay Junction layout. Managing editor David Popp and Editor Neil Besougloff work on the scenery base. On the other side of the Milwaukee, Racine & Troy, associate editor Cody Grivno is working on another scene, a feed mill that […]
Lots of progress has been made on the Model Railroader staff’s HO scale Bay Junction project layout. Associate editor Cody Grivno is working on ballasting track, including the interchange yard. Editor Neil Besougloff shows you how he painted the parking lot for his station. Associate editor Steve Otte describes his method for paving the streets […]
The final scenery and details are starting to take shape on the Model Railroader Bay Junction project layout. Associate editor Cody Grivno describes some of the scene that he’s been working on around the grain elevator, while associate editor Steve Otte adds the last road signs and other details to Williams Bay. You’ll also see […]
A special guest stopped by while we were working on the railroad. Tony Koester, a contributing editor to Model Railroader and the editor of Model Railroad Planning, stopped by to check out the progress of Bay Junction on the Milwaukee, Racine & Troy. Executive editor Andy Sperandeo shows how his corn syrup transloading terminal is […]
Managing editor David Popp continues to work on the cork roadbed for the layout. He uses a surform tool to make a smooth transition from the mainline roadbed to the industrial section of the layout. Model Railroader editor Neil Besougloff describes his plan for adding a fence and streetlights to the train station scene at […]
David has finished laying all the track for Bay Junction and will show you how to install feeder wires. In the workshop you’ll see how associate editor Cody Grivno is progressing on the United Cooperative grain elevator, while senior editor Dana Kawala gets started on the fertilizer plant. […]
The Model Railroader staff is working on the Bay Junction project layout. Managing editor David Popp runs track through the backdrop for the Kelly Appliance factory while associate editor Steve Otte is building shallow interior shadow boxes for the town. […]
The Model Railroader staff continues to work on the Bay Junction HO scale project model train layout. Managing editor David Popp fastens down new plywood for the base of the new town coming in, senior editor Jim Hediger is completing the finishing touches of the moveable step, and editor Neil Besougloff is painting the roof […]
