7 adhesives and glues for the model railroad

Several types of glues and adhesives shown on a workbench

Choosing the right adhesive for model railroads is important. Glues and adhesives bond two or more surfaces in different ways with varying degrees of strength. In model railroading, choosing the right glue or adhesive is often the best way to successfully complete a satisfying model or model railroad layout. Here are five top glue types […]

Read More…

Sketching with Steve: Planning a structure kitbash

A rough isometric sketch of a small creamery is surrounded by kit parts and a book about railroad milk traffic.

When I’m planning a structure kitbash, I often start with a sketch. Scribbling down rough ideas, erasing what doesn’t work, and replacing them with things that help me visualize my plan and avoid false starts. With this technique I can figure out what parts I need and more clearly imagine what the structure will look […]

Read More…

Sketching with Steve: The Free-Mo modular standard

A sketch of the end of a Free-Mo HO scale layout module, surrounded with text describing the Free-Mo standard.

There are several modular model railroading standards out there, but one you might have heard more about recently is the Free-Mo modular standard. Like most modular standards, the Free-Mo modular standard lets you build a section of model railroad that will connect and operate with others built to the same standard. The cool thing about […]

Read More…

Sketching with Steve: Finding the best approach for a track plan

Pencil drawing of two track plans to fit a 9 x 12 spare bedroom

Finding the best approach for a track plan isn’t always easy. Even if you’re building your layout in a small room, you still have an almost infinite number of choices, decisions, and trade-offs to make. What scale? Around-the-room or island shape? Duckunder/gate or walk-in? Staging? And if so, what kind? To illustrate my thought process […]

Read More…

Sketching with Steve: What’s wrong with this picture?

A magazine showing an HO scale track plan is lying open on a large paper drawing of the same plan

Today’s sketch was drawn long before Sketching with Steve was a gleam in anyone’s eye. It was 2008, and I’d been with Model Railroader less than a year. Finally, the resources to build my HO scale version of the Cincinnati, Lebanon & Northern Ry. in 1906 were within my reach! I drew this track plan […]

Read More…

An introduction to track wiring basics

Diagram showing the path power takes from a booster, through a bus, and to the track.

There is probably no other aspect of our hobby that creates more anxiety and confusion for newcomers than wiring. When you’re starting at absolute ground zero on the learning curve it can be daunting at times. However, at the most basic level, what we’re trying to do is get electricity from a power source to […]

Read More…

Sketching With Steve: Using DPDT switches

Pencil sketches on graph paper show four applications for double-pole double-throw switches

On a railroad, a switch usually refers to the moving parts of a turnout that routes a train between two possible routes. This time, though, we’re talking about an electrical switch: specifically, a double-pole double-throw switch (DPDT). It’s easy to understand a single-pole single-throw switch: it only has two states, open or closed, off or […]

Read More…

Track wiring for beginners

Pair of wires seen alongside track attached to a power bus.

Track wiring your model railroad layout can be daunting, especially for beginners to the hobby. In order to help those looking to start, here’s a review of the bare-bones basics of wiring your layout that will help you get your trains up and running as quickly as possible. Run the wire bus roughly beneath the […]

Read More…

Resuscitating a lifeless locomotive

A stethoscope is used to listen to a model locomotive being held upside down in a foam cradle

Good news! If your lifeless locomotive has ever run under Digital Command Control (DCC), chances are good that you can get it running again without having to send it off for repair. The solution is easy, too! More good news! If you have a new steam locomotive that doesn’t run or only partially works, maybe […]

Read More…

DCC wiring for a shelf layout

Track on board being soldered with pencil-type soldering iron

My little shelf layout is made from track and lumber salvaged from a small model railroad I was building in my apartment living room back in Pennsylvania before I moved to Wisconsin to work for Model Railroader. In my current living room, I only have room for a shelf layout, which is built into an […]

Read More…