B&O freight under wire

Road-switcher diesel locomotives with freight train

Two GP38s and a GP40 lead a Baltimore & Ohio freight out of Richmond, Fredericksburg & Potomac’s Potomac Yard in Arlington, Va., in April 1971. The train will soon enter Washington, D.C., via the “Long Bridge” over the Potomac River. The catenary is for Penn Central freight trains, which also use “Pot Yard.” David Ingles […]

Read More…

Auto-rack revolution

Automobiles being loaded on tri-level freight cars

By the early 1960s, railroads began reclaiming auto traffic from highway trucks with long two- and three-level auto racks on flatcars. Here, new Thunderbirds and other Fords are loaded aboard a Western Pacific tri-level car built by ACF. American Car & Foundry […]

Read More…

Casey at the throttle

Engineer and fireman on steam locomotive

In the only known photo of legendary engineer John Luther “Casey” Jones at the throttle of a locomotive, Jones and fireman J. W. McKinnie are ready to take Illinois Central 2-8-0 638 out for a break-in run after a shopping at Water Valley in summer 1898. Less than two years later, Jones perished in a […]

Read More…

Powder River Trickle

A coal train bound for Cohasset, Minnesota

The flood of Powder River Basin coal that became so important to successor Burlington Northern began modestly on NP, with a 1969 contract to move coal from Colstrip, Mont., to Cohasset, Minn. In July 1969, a Cohasset-bound train pauses in Mandan, N.D. Duane Durr collection […]

Read More…

Monon RPO

Railway Express Agency truck

A Railway Express Agency truck, along with a cart with milk cans, transfers express into a messenger car, while in the background, mail bags are loaded and unloaded from an RPO car along the Monon in 1948. Photo by Linn Westcott […]

Read More…

10 tips for using MTH Trains’ RealTrax

RealTrax switch with bottom cover removed

Here are a few tips and tricks when working with MTH RealTrax:   The two ground rails are not tied together. This is true for other track systems using non-metallic ties, including those from Atlas O and GarGraves. If you add a switch, you need to add a lockon and make sure it’s on the […]

Read More…

Cut door and window openings

HO scale liquefied petroleum gas dealer at Hales Corners on Milwaukee, Racine & Troy.

I enjoy scratchbuilding structures from styrene because it’s easy to cut, it takes glue well, and it’s readily available, 1. Though cutting wall sections is easy, making door and window openings can be tedious. However, with the Nibbler cutting tool, you can cut openings quickly and accurately. The Nibbler is a hand-operated punch-and-die tool that […]

Read More…

Glaze windows with adhesive

Testor’s Clear Parts Cement and Widow Maker and Microscale Kristal Klear with HO and Z scale laser-cut wood buildings.

Microscale Kristal Klear is a versatile adhesive. One of its uses is to secure clear parts to models. But in a few simple steps, the adhesive can also be used for window glazing, 1. Kristal Klear works best on smaller window panes. Start by dipping a Microbrush into the Kristal Klear. Then, working from the […]

Read More…